Unlock the Mysteries of OSHA’s Lockout/Tagout Rule (PART 2 of 2 – Five Common LOTO Mistakes)

By Eric J. Conn and Aaron R. Gelb

For a host of reasons, it is vital for employers to get compliance with OSHA’s standard for the “control of hazardous energy (Lockout/Tagout)” (29 C.F.R. 1910.147) (LOTO) right, but it also happens to be one of the least understood and most often botched set of regulatory requirements in OSHA’s portfolio of standards.

This two-part article lays out:

  • [Part 1]: 5 reasons it is critical for employers to ensure compliance with OSHA’s LOTO Standard; and
  • [Part 2]: 5 common mistakes employers make implementing LOTO requirements.

Part 1 Summary: Five Reasons it is Critical to Get LOTO Right

As we discussed in Part 1 of this two-part article, there are five important OSHA enforcement reasons why it is vital for employers to truly grasp OSHA’s regulatory requirements for lockout/tagout (LOTO) and implement them.

Those 5 reasons are:

  1. Amputation Injuries Create Special Reporting Obligations
  2. LOTO Citations are Low Hanging Fruit for OSHA
  3. OSHA is Actively Pursuing LOTO Violations with a National Emphasis Program
  4. LOTO Violations Qualify for the Severe Violator Enforcement Program
  5. LOTO Violations are Among the Most Used for OSH Act Criminal Prosecutions

For a detailed discussion about those reasons, check out Part 1 of this two-part article.

Part 2: Five Common LOTO Mistakes

This part details the five most common mistakes and misunderstandings associated with OSHA’s regulatory requirements for LOTO.

     1. Confusion about When the LOTO Standard Applies

Normal production operations are not covered by the LOTO standard.  Rather, the requirements of OSHA’s LOTO standard kick in during servicing and/or maintenance, or any production activity that requires an employee to remove or bypass a guard or other safety device, or if an employee is required to place any part of his or her body into an area on a machine or piece of equipment where work is performed upon the material being processed.  Otherwise, the employer is expected to install and maintain appropriate guards that protect employees as required by 1910.212, OSHA’s machine guarding standard.

While the LOTO and machine guarding standards tend to complement each other—one protects employees during normal production operations (guarding), while the other protects employees during servicing or maintenance (LOTO).  Technically, OSHA may not cite the Continue reading

Unlock the Mysteries of OSHA’s Lockout/Tagout Rule (PART 1 of 2 – Five Reasons to Get LOTO Right)

By Eric J. Conn and Aaron R. Gelb

For a host of reasons, it is vital for employers to get compliance with OSHA’s standard for the “control of hazardous energy (Lockout/Tagout)” (29 C.F.R. 1910.147) right, but it also happens to be one of the least understood and most often botched set of regulatory requirements in OSHA’s portfolio of standards.

This two-part article will lay out:

  • [Part 1]: Five reasons it is critical for employers to ensure compliance with OSHA’s LOTO Standard; and
  • [Part 2]: Five common mistakes employers make when implementing the LOTO requirements.

Part 1: Why it is Critical for Employers to Get LOTO Right

The list could be much longer, but we have identified five enforcement-related reasons why it is particularly important for employers to fully grasp OSHA’s LOTO requirements and to implement them effectively.

Before we get to the enforcement reasons for strict LOTO compliance, let’s first note that the associated hazards that LOTO was designed to protect against are serious and frequently realized.  Workers performing service or maintenance on machinery face the risk of serious injuries and even death, if hazardous energy is not properly controlled.  The most common types of injuries from unexpected energization during maintenance are amputations or lacerations to body parts, as well as electrocutions, burns, and crushing/struck-by.

OSHA reports that “craft workers, electricians, machine operators, and laborers are among the 3 million workers who service equipment routinely and face the greatest risk of injury. Workers injured on the job from exposure to hazardous energy lose an average of 24 workdays for recuperation.”  OSHA also explains that the failure to control hazardous energy accounts for 10% of the serious accidents in most industries.

While employers should never lose focus from that important safety reason to focus on LOTO, the purpose of this article is to address the numerous regulatory enforcement reasons that getting LOTO right is uniquely important.

    1.  Amputation Injuries Create Special Reporting Obligations

Amputations, which is one of the primary hazards intended to be addressed by effective LOTO, is one of the only specific injury types for which there is a special duty for employers to proactively to report to OSHA.  Continue reading

Unlock The Mysteries of OSHA’s Lockout/Tagout Standard [Webinar Recording]

On February 20, 2018, Eric J. Conn and Aaron R. Gelb of the national OSHA Practice Group at Conn Maciel Carey presented a webinar: “Unlock The Mysteries of OSHA’s Lockout/Tagout Standard.

OSHA’s Lockout/Tagout (Energy Control) Standard is always one of OSHA’s most frequently cited standards, and now, with the “Amputations National Emphasis Program” raging on into 2018, as well as LOTO violations continuing to be considered “high emphasis hazards” to qualify employers into the dreaded Severe Violator Enforcement Program, it is critical for employers to get Lockout/Tagout right.  While LOTO continues to be an important standard, it also continues to be one of the least understood standards.  This webinar will highlight the Top 10 most misunderstand and frequently cited aspects of the LOTO rule, and forecast some potential changes to the rule and OSHA’s enforcement of it.

During this webinar, participants learned: Continue reading